| 产品名称 | Titanium Oxide (Anatase, ATO doped, 20 wt%, 15-25 nm) Slurry (NanoAmor) |
|---|---|
| 目录号 | 7030WJ |
| 别名 | Titanium Oxide (Anatase, ATO doped, 20 wt%, 15-25 nm) Slurry |
| 外观 | N/A |
| 分子量 | N/A |
| CAS | N/A |
| 溶解度 | N/A |
| 存储条件 | 常温 |
| 保存时间 | 见说明书 |
| 备注1 | 规格：5kg; |
| 备注2 | N/A |
| 目录号 | 规格 | 价格 | 库存状态 | |
| 7030WJ | 咨询 | 咨询 | 咨询 |
20 wt%Titanium Oxide (Antimoney Tin Oxide doped) Slurry Click to ask a technical question
Antimony-Tin Oxide (ATO, Sb2O3/SnO2) Doped Titanium Oxide (TiO2) for a high photocatalytic efficiency under visible light
Average Particle Size of ATO-doped TiO2: 15-25 nm
Content of ATO-doped TiO2: 20 wt%
Purity of ATO-doped TiO2: 99.9%
Color: white
Stability: slurry is stable for up to six months in dry and cool environment
Titanium Oxide: Anatase TiO2, CAS #: 1317-70-0
Antimony Tin Oxide: Sb2O3/SnO2, CAS#: 128221-48-7
Water: H2O, CAS#: 7732-18-5
Applications: coatings with a high photocatalytic efficiency
Substrate Materials: glasses, ceramics, metals, and polymers.
Instructions for making coatings:
1) Remove the rust and/or oxidation layers on the surface of metal substrate by sand-blasting, or clean the non-metallic substrates by water and/or ethanol. Wait till the substrates are dry before making coatings.
2) Shake the container with slurry to make the slurry uniform.
3) Use such methods as spraying, brushing, and roller coating to place the slurry on the surface of substrate. This operation should be performed in an environment with a relative humidity below 40%.
4) Let the coatings dry slowly in environment or dry quickly in a dryer at 100 oC for one hour.
MSDS
COA
维百奥生物代理Nanostructured & Amorphous Materials公司全系列产品。
