| 产品名称 | Tritech Research | SMM-100C | Stereotaxic Micromanipulator |
|---|---|
| 目录号 | SMM-100C |
| 别名 | Stereotaxic Micromanipulator |
| 外观 | 见COA |
| 分子量 | N/A |
| CAS | N/A |
| 溶解度 | |
| 存储条件 | 见COA |
| 保存时间 | 见COA |
| 备注1 | |
| 备注2 |
| 目录号 | 规格 | 价格 | 库存状态 | |
| SMM-100C | 咨询 | 咨询 | 咨询 |
Tritech Research | SMM-100C | Stereotaxic Micromanipulator
品名：Stereotaxic Micromanipulator
货号：SMM-100C
规格：1
品牌：Tritech Research
产品描述
The SMM-100C is a new coarse manipulator for stereotaxic instruments focusing on driving outside the animal's brain. The driving by Z-axis control knob: approximately 4mm per rotation makes faster adjustments for leveling bregma and lambda, and faster retracting/returning from the dura mater, which will improve efficiency of the experiment. For operations inside the brain, One-axis Motorized Stereotaxic Micromanipulator MDS-1 and hydraulic manipulator can be added optionally. The X-axis is equipped with a coarse control knob, which is the same as the Z-axis. The Y-axis (anterior/ posterior direction) is equipped with a fine control knob. The upper body of SMM-100C is switchable in either AP or ML direction when using it with tilting angle.* The minimum graduation of the X and Z-axis is 100µm. This manipulator is recommended to be used in combination with a fine micromanipulator (MDS-1, etc). Set-up example*Stereotaxic instrument, GM-4, MDS-1, and SMM-HA, the silicon probe in the photo above are not included.Set-up example with SMM-ASMM-A is recommended for experiments: tilting in the ML direction.When the manipulator SMM-100C/200C is tilted in the ML direction, the end of the holder (electrode tip) may be far off from animal's head. The attachment SMM-A is designed to attach a holder on the side of manipulator, so it enables the holder position without operating the X-axis. To this end, the holder (electrode tip) can be set to the animal's head while maintaining driving distance of the X-axis.*The set-up example above: motorized MDS-1 and IMS-30 on SMM-100C installed with SMM-A.SMM Series Comparison TableSMM SeriesSMM-100SMM-200SMM-100CSMM-200CAnglesOne direction(AP or ML)SwitchableSimultaneousTwo directions(AP & ML)One direction(AP or ML)SwitchableSimultaneousTwo directions(AP & ML)X Axis, Z-axisFineFineCoarseCoarseY-axisFineFineFineFineHolders for SMM seriesModelSMM-ASMM-HASMM-HBSMM-HCSMM-HDDescriptionAttachmentHolder for Neural ProbesHolder for Neural ProbesCannula HolderMultiuse HolderSpecificationAccessories includedHex Wrenches (2mm and 2.5mm)Dedicated electrode holder (with attachment and screw)Screw for groundingWashers for grounding (Bellville washer and flat washer)Movement rangeX80mm, Z80mmFull rotation of knob 4.2mmMinimum graduation 100µm(Vernier scale)Y20mm, Full rotation of knob 1mm,Minimum graduation 10µmDimensions/WeightW85 × D162 × H256mm, 1.75kg
