| 产品名称 | Tritech Research | H-7 | Electrode Holder for 1mm electrodes, 4mmø bar |
|---|---|
| 目录号 | H-7 |
| 别名 | Electrode Holder for 1mm electrodes, 4mmø bar |
| 外观 | 见COA |
| 分子量 | N/A |
| CAS | N/A |
| 溶解度 | |
| 存储条件 | 见COA |
| 保存时间 | 见COA |
| 备注1 | |
| 备注2 |
| 目录号 | 规格 | 价格 | 库存状态 | |
| H-7 | 咨询 | 咨询 | 咨询 |
Tritech Research | H-7 | Electrode Holder for 1mm electrodes, 4mmø bar
品名：Electrode Holder for 1mm electrodes, 4mmø bar
货号：H-7
规格：1
品牌：Tritech Research
产品描述
Narishige's H-7 electrode holder holds electrodes with outer diameter between 1.0 mm and 1.5 mm. It is ideal for electrophysiology manipulations.NOTE: If you were considering using H-7 in a microinjection setting, for example, with a microinjection manipulator such as MN-151, we recommend that you switch either to Narishige's HI-7 or Tritech Research's MINJ-4. These provide a more reliable interface for applying pressure to microinjection pipettes and obviate accidental breaking of needles.*For O.D.1.0 - 1.5mm pipettes *Bar O.D.4mmThe H-7 has a two pipette holding groves, so it can function as a dual pipette holder or dual electrode holder. It can hold 2 pipettes in parallel, 4mm apart from each other; however, it does not allow for fine independent positioning of the two glass needles or 2 electrodes... For positioning two pipettes or electrodes, we recommend HD-21.Here is a mechanical drawing showing the dimensions of the end of the H-7 holder:Specification Length/Weight L120mm, 10g FAQ's Q: Is the HI-7 needle holder compatible with the MINJ-1 or MINJ-D micro injectors?>click here< A: The HI-7 needle holder does not come with any tubing, so in order to attach it to the MINJ-1 or MINJ-D, you will need to purchase 2mm OD tubing (such as the CT-1). The tubing will need to be installed onto the HI-7 (usually via fire glazing) and this can be done on your own or Narishige can install it if you order both items together.
