| 产品名称 | Tritech Research | EG-402 | Micropipette Grinder |
|---|---|
| 目录号 | EG-402 |
| 别名 | Micropipette Grinder |
| 外观 | 见COA |
| 分子量 | N/A |
| CAS | N/A |
| 溶解度 | |
| 存储条件 | 见COA |
| 保存时间 | 见COA |
| 备注1 | |
| 备注2 |
| 目录号 | 规格 | 价格 | 库存状态 | |
| EG-402 | 咨询 | 咨询 | 咨询 |
Tritech Research | EG-402 | Micropipette Grinder
品名：Micropipette Grinder
货号：EG-402
规格：1
品牌：Tritech Research
产品描述
Narishige's EG-402 replaces the EG-401. It includes a built-in microscope to observe the pipette at contact with the grinding plane. The EG-402 is typically used for beveling glass microcapillary microinjection needles, yielding both a sharper needle and a larger opening. It can also be used for almost any fine polishing operation.This model provides stable performance at both lower speeds for more precision and higher speeds for faster grinding. The unit includes a coarse and fine movement coaxial manipulator, for vertical operation of the micropipette, which enables precise grinding. A protractor is mounted on the pipette holder fixing section, making it easy to set the required grinding angle, and an adaptor is attached for vertical grinding. Water filling and drainage mechanisms are installed to prevent clogging or the accumulation of shavings, making the apparatus as a whole much easier to use.Here are videos that shows the EG-402 beveling a needle:Specification Accessories included Adaptor for Vertical GrindingDedicated Pipette HolderHex WrenchPower Cord Movement range Up-and-down manipulator: Approx. 47mm Microscope: Y (Focus-Coarse) 30mmX (Swing-Fine control knob) approx. 5 degZ (Tilt-Fine control knob) approx. 3 deg Magnifications 30x (Eyepiece 10x, Objective lens 3x) Glass capillary O.D.1mm - O.D.1.5mm Working voltage AC100V - AC240V, 50/60Hz Power consumption 10W Moter speed Approx. 150 - 2,100 rpm(The diamond wheel may be stopped under 150 rpm.) Dimensions/Weight W250 x D450 x H430mm, 6.4kg
